Driver_power_state_failure error on windows 10

How To Fix DRIVER_POWER_STATE_FAILURE Blue Screen Of Death Error

BSOD (or Blue Screen Of Death) is an error that appears on a blue screen and usually indicates that the operating system is experiencing a system crash. It is not always as serious as it may seem, depending on the error code. The error usually prevents Windows from starting, but this is not always the case. Simply restarting the computer can remove sầu the error, but this is not necessarily a solution and the blue screen problem might return.

Bạn đang xem: Driver_power_state_failure error on windows 10

You might have sầu experienced the blue screen of death with a specific error called "DRIVER_POWER_STATE_FAILURE". This usually appears when the computer is put inlớn sleep mode và is subsequently reactivated (woken up). There could also be other reasons for this problem. Generally, this error notifies you that there are problems with drivers: installed drivers are incompatible or not working properly. A device driver is software that informs the operating system and other software how lớn interact with particular hardware. It is rather like a translator between software và hardware, since they often are created by different manufacturers, companies, or people. The driver facilitates smooth communication between hardware và software. In most cases, computers are unable lớn sover & receive data correctly without drivers. If the appropriate driver is not installed, the device might not function properly (if at all) và give various blue screen of death errors, including DRIVER_POWER_STATE_FAILURE.

Fortunately, it is possible to fix BSOD errors. In this guide, we outline various methods to update or reinstall drivers, or lớn adjust power settings. Read the guide below and follow the steps khổng lồ fix DRIVER_POWER_STATE_FAILURE in a few simple steps.

NOTE: If the DRIVER_POWER_STATE_FAILURE error prevents you from starting Windows, you must boot Windows into Safe Mode with Networking. Read this guide and use the "Interrupt Windows Boot Process" method. Then, start Windows in Safe Mode with Networking from there.

*

Table of Contents:


It is recommended to run a không tính tiền scan with Combo Cleaner - a tool khổng lồ detect malware & fix computer errors. You will need to purchase the full version khổng lồ remove infections và eliminate computer errors. Free trial available.


Update Drivers

As mentioned before, the reason behind this DRIVER_POWER_STATE_FAILURE error could be outdated, incompatible, or corrupt drivers. To remedy this situation, you might need khổng lồ update the problematic drivers. Open Device Manager by right-clicking the Start button and selecting "Device Manager" result from the contextual menu, or type "device manager" in Search and cliông xã the "Device Manager" result.

*

In Device Manager, you will see a danh sách of devices connected lớn your computer. Find the ones that have a yellow warning sign next khổng lồ them và expvà them. Right-cliông chồng the device and select "Update driver" from the drop-down thực đơn.

*

You will be asked if you want to search for updated driver software automatically or khổng lồ browse your computer for driver software. If you select the first option, Windows will tìm kiếm your computer and the Internet for the lathử nghiệm driver software for your device. If you select the second option, you must locate và install the drivers manually. Using this option requires having previously downloaded the drivers on your computer or USB flash drive sầu. We recommover that you select the first option and follow the instructions. Apply the steps to all problematic devices that have sầu the warning sign displayed.

*

Another way to update or install new drivers for devices is lớn use third-tiệc ngọt software such as Snappy Driver Installer. Snappy Driver Installer (SDI) is a powerful không tính tiền driver updater tool for Windows that can store its entire collection of drivers offline. Having offline drivers gives Snappy Driver Installer the ability to lớn have access to lớn fast driver updates, even if there is no active sầu Internet connection on your computer. Snappy Driver works with both 32-bit và 64-bit versions of Windows 10, Windows 8, Windows 7, Windows Vista, và also works with Windows XP. Drivers are downloaded through Snappy Driver Installer in "driverpacks", which are simply collections (packs) of drivers for various hardware such as sound devices, đoạn phim cards, network adapters, etc. It can also show duplicate drivers & invalid drivers. It separates the updates that require you khổng lồ restart your computer so that they are easier to lớn distinguish. You can tải về Snappy Driver Installer from here. 

*

Reinstall Drivers

If updating problematic drivers does not fix the DRIVER_POWER_STATE_FAILURE error, you might want to reinstall them. xuất hiện Device Manager (by following the previous steps), find the devices that have warning signs next lớn them & expvà them. Right-click your device and select "Uninstall" from the drop-down thực đơn to lớn uninstall it.

*

In the popped-up window, cliông chồng "Uninstall". Ensure that you kiểm tra the "Delete the driver software for this device" checkbox. Restart the computer. Windows will automatically install missing graphics drivers the next time you start Windows. If Windows could not start normally, start the operating system in Safe Mode with Networking.

*

If Windows does install the missing (uninstalled) drivers, go khổng lồ Device Manager and right-clichồng your computer name. Select "Scan for hardware changes". This should detect missing drivers và install them.

*

Adjust Power nguồn Management Options

To adjust Power Management settings, open Device Manager & exp& the "Network adapters" section. Right-cliông chồng the network adapter & select "Properties" from the contextual menu (or simply double-clichồng it).

*

In the network adapter properties window, find & clichồng the "Power Management" tab và ensure that the "Allow the computer to lớn turn off this device to lớn save sầu power" option is disabled.

Xem thêm: Thuật Ngữ Closing Time Là Gì ?Những Lưu Ý Và Quy Định Về Close Time

*

Apply these steps lớn all devices connected to your computer. Only some will have the "Power Management" tab, so vị not be surprised if you cannot find it in the device properties window. See if this fixes the DRIVER_POWER_STATE_FAILURE error.

Adjust Power nguồn Plan Settings

The Power Plan feature in Windows 10 is not new, since it was also available in earlier versions of the operating system. nguồn Plan is a collection of hardware và system settings that manage how your computer uses power. In this case, we will change the advanced power settings and enable maximum power settings. Type "edit power plan" in Search & cliông chồng the "Edit power plan" result.

*

In the Edit Plan Settings window, you can edit the settings of the power plan you are currently using. If you want to edit another plan, use the next window. Find & cliông xã "Change advanced power settings".

*

In the Power Options window, find the "PCI Express" ("Graphic Settings" or "Link state Power nguồn Management") and double-clichồng it. Now set "On battery" and "Plugged in" khổng lồ "Off".

*

Now find và double-clichồng "Wireless Adapter Settings" & ensure that Power nguồn Saving Mode is mix khổng lồ "Maximum Performance" when on battery and plugged in. Click "Apply" to save the changes và see if this fixes the DRIVER_POWER_STATE_FAILURE error.

*

Run System File Checker

System File Checker (SFC) is a utility in Windows that allows users to lớn scan for corruptions in Windows system files and restore them. This guide describes how to run the System File Checker tool (SFC.exe) lớn scan your system files và to repair missing or corrupted system files (including .DLL files). If a Windows Resource Protection (WRP) file is missing or corrupted, Windows might not behave as expected. For example, some Windows functions might not work, or Windows might crash. The "sfc scannow" option is one of several specific switches available with the sfc commvà, the Commvà Prompt commvà used lớn run System File Checker. To run it, first open Commvà Prompt first by typing "command prompt" in Search, right-cliông chồng on "Commvà Prompt", & then select "Run as administrator" from the drop-down thực đơn khổng lồ run Commvà Prompt with administrator privileges. You must run an elevated Comm& Prompt to be able khổng lồ perkhung a SFC scan.

*

In the Comm& Prompt window, type "sfc /scannow" and press Enter on the keyboard to exedễ thương this commvà. System File Checker will start và should take some time to complete the scan (about 15 minutes). Wait for the scanning process khổng lồ complete and restart your computer to lớn see if you still receive sầu the DRIVER_POWER_STATE_FAILURE error.

*

Update BIOS

BIOS (Basic Input Output đầu ra System) is software stored on a small memory chip on the motherboard. Updating BIOS might fix the DRIVER_POWER_STATE_FAILURE error. Bear in mind that updating the BIOS is a procedure for advanced users and, if not performed properly, can cause permanent hardware damage. To update the BIOS, go khổng lồ the motherboard manufacturer trang web và download the lachạy thử BIOS version for it. There should be a manual describing how khổng lồ update the BIOS - ensure that you read it carefully. If you bởi not know how to lớn update the BIOS, find an expert to lớn avoid damage to lớn your computer.

Run System Restore

Finally, we recommkết thúc that you run System Restore using restore points. A restore point is a collection of important system files stored by System Restore on a given date và time. System Restore reverts everything to a saved restore point, but first, you must have sầu one recorded. If a restore point does not exist on your computer, System Restore has nothing lớn revert to lớn. To use this tool, you must have sầu created restore points. With a created restore point, this feature will bring your system baông chồng to lớn the previous working state, without affecting your files & data. If you have any system restore points that were created before you started receiving the DRIVER_POWER_STATE_FAILURE error, you might be able to lớn fix the problem by performing a System Restore. To restore your system, launch Run. To start it, press the Windows Key + R and type "rstrui.exe". In the Run dialog box, press Enter or click "OK".

*

In the System Restore window, cliông xã "Next".

*

If there are restore points created, you will see a danh sách of them. Mark the "Show more restore points" checkbox. This should display more restore points. Select the most appropriate restore point (depending on the time created, etc.) và clichồng "Next". Do not select a Restore Point at a time when the DRIVER_POWER_STATE_FAILURE error was already present - you certainly bởi not want to lớn revert to lớn that state.

*

Confirm the restore point. Your computer will be restored to lớn the state prior lớn the sự kiện detailed in the "Description" field. If you are happy with your choice, clichồng "Finish" và the system restore process will begin.

Xem thêm: Cao Gạc Nai Là Gì? Công Dụng Và Cách Dùng Cây Cỏ Gạc Nai Là Cây Gì

*

We hope this guide was helpful and you were able to lớn fix the DRIVER_POWER_STATE_FAILURE error. If you know of other solutions to this problem, not mentioned in our guide, please share them with us by leaving a phản hồi in the section below.